Terminal Blocks

Relay Sockets

Engineered to produce perfect results for every application

Features

  • Permanent-numbered terminals for easy identification
  • Thermoplastic sockets with closed-back design (eliminates panel insulation, and resists breakage)
  • Nickel-plated screw-type terminals on break-resistant barrier-type terminal blocks
  • Screw-type terminals on some models have captivated wire clamps to eliminate lugging
  • Compact, printed circuit design
  • Glass epoxy G-10 printed circuit boards
  • Can be laid in tracks for insertion of marking strips
  • Maximum relay retention and electrical conductivity

Download Entire Terminal Blocks Catalog

CUS Series

CUS8 and CUS11
CUS8 and CUS11

8- and 11-pin unitized octal-type socket assemblies

SPECIFICATIONS

  • Rating: 10 amps, 300 volts.
  • Track: TR2 48”length holds up to 30 CUS8 sockets and 21 CUS11 sockets.
  • Terminals: 6-32 screws with captivated traveling nut.
  • Wire: Up to No.12AWG wire.
  • Sockets: CUS8 - 8-pin receptacle for 2PDT octal relay or timer; CUS11 - 11-pin receptacle for 3PDT octal relay or timer.

Catalog Page
CUS5, CUS12 and CUS16

CUS12

CUS16

CUS5, CUS12 and CUS16

5-, 12-, and 16-pin unitized square-base relay-type socket assemblies

SPECIFICATIONS

  • Rating: 15 amps, 250 volts.(CSA rated 15 amps, 125 volts)
  • Track: TR3 48”length holds up to 28 sockets.
  • Terminals: No. 6-32 screws with captivated traveling nut.
  • Wire: Up to No.14AWG wire.
  • Sockets: CUS12 - 11-pin receptacle for 3PDT square-base barrier-type plug-in relays. CUS16 - 8-pin receptacle for 2PDT square-base, barrier-type plug-in relays. CUS5 - 5-pin receptacle for SPDT square-base, barrier-type plug-in relays.

Catalog Page

RS Series

RS8 Relay Socket
RS8

8-pin octal-type socket assemblies

SPECIFICATIONS

  • Rating: 10 amps, 250 volts.
  • Track: TR2 48”length holds up to 24 sockets.
  • Terminals: RS8 - No. 6-32 screws, 7/16” C. to C. spacing. RS8SC - No. 6-32 screws with captivated wire clamp. 7/16” C. to C. spacing(no lugs required).
  • Wire: RS8 - up to No. 12AWG (lugs are recommended on wire larger than No.16AWG)
    RS8SC - up to two No. 12AWG
  • Sockets: 8-pin octal receptacle to accept standard 2PDT relays and timers. Recessed slotted center post chamber allows relays to be rocked out without danger of damaging relay center posts. PC board has center post clearance hole to allow relays with screws in center post. Phosphor bronze contacts for better pin contact and retention.

Catalog Page
RS11 Relay Socekt
RS11

11-pin octal-type socket assemblies

SPECIFICATIONS

  • Rating: 10 amps, 250 volts.
  • Track: TR2 48”length holds up to 16 sockets.
  • Terminals: RS11 - No. 6-32 screws, 7/16” C. to C. spacing.
    RS11SC - captivated wire clamp, 7/16: C. to C.
  • Wire: RS11 - up to No. 12AWG.(lugs are recommended on wire larger than No.16AWG). RS11SC - up to two No. 12AWG.
  • Sockets: 11-pin octal receptacle to accept 3PDT relays.
    Refer to RSB socket for features

Catalog Page
RS2

RS4

RS6

RS2, RS4 & RS6

10-, 16-, and 22-pin square-base miniature relay-type socket assemblies

SPECIFICATIONS

  • Rating: 5 amps, 125 volts.(UL rated 3 amps, 125 volts)
  • Track: TR1 48” length holds up to 24 RS2 sockets, 21 RS4 sockets and 16 RS6 sockets.
  • Terminals: No. 2-56 screws with clamp - 1/4” C. to C. spacing.
  • Wire: Up to No.16AWG wire.
  • Sockets: RS2 - 10-pin receptacle to accept miniature 2PDT relays with latching coils.
    RS4 - 16-pin receptacle to accept miniature 4PDT relays with latching coils.
    RS6 - 22-pin receptacle to accept miniature 6PDT relays with latching coils.

Catalog Page
RS12 Relay Sockets

RS16 Relay Sockets

RS12 & RS16

8-, and 11-pin square-base relay-type socket assemblies

SPECIFICATIONS

  • Rating: 10 amps, 250 volts.
  • Track: TR3
    48”length holds up to 16 RS12 or RS12SC sockets.
    48”Length holds up to 22 RS16 or RS16SC sockets.
  • Terminals: RS12 and RS16 - No. 6-32 screws, 7/16” C. to C. spacing.
    RS12SC and RS16SC - captivated wire clamp. 7/16” C. to C. spacing.
  • Wire: RS12 and RS16 - up to No. 12AWG. (lugs are recommended on wire larger than No. 16AWG).
    RS12SC and RS16SC - up to two No. 12AWG.
  • Sockets: RS12 and RS12SC - 11-pin receptacle to accept 3PDT relays.
    RS16 and RS 16SC - 8-pin receptacle to accept 2PDT relays.
  • NOTE: RS12 and RS12SC - CSA rating is 10 amps, 125 volts

Catalog Page
RS14 Relay Sockets

RS15 Relay Sockets

RS14 & RS15

14-, and 15-pin square-base relay-type socket assemblies

SPECIFICATIONS

  • Rating: 5 amps, 125 volts.
  • Track: TR2
    48”length holds up to 24 sockets.
  • Terminals: No. 2-56 screws with clamps.(1/4” C. to C. spacing)
  • Wire: up to No.16AWG wire
  • Sockets: 14-pin receptacle to accept miniature 4PDT relays.

Catalog Page

Track

Track
New DIN Track
  • Pre-punched track minimizes mounting time
  • Wide center channel allows for under board components
  • Lengths up to 48” (holds up to 30 socket assemblies)
  • Easy snap assembly
  • PVC thermoplastic, UL 94V-0, rated up to 50o C
  • Three board or socket widths
    • 2-3/16”
    • 2-3/4”
    • 3-1/4”

 

Accessories

Relay Sockets Accessories
Accessories
  • 18836 - (RS2 socket only)
  • 18837 - (RS4 socket only)
  • 18838 - (RS6 socket only)
  • 18830 - (RS14 & 15 socket only)
  • 18831 - (RS12 socket only)
  • 18835 - Round 11-pin socket(RS11)
  • 18821 - Round octal socket (RS8)
  • 18832 - Square 8-pin socket (RS16)
  • 44600 - Relay tie down spring
  • 44613 - Tie down bail (CUS5, 12, 16)
  • 44617 - Relay hold down clip (CUS5, 12, 16)
  • 44610 - Tie down bail (CUS14 & 15)
  • 62610 - TR track end clips

Catalog Page

 

 

RoHS 2002/95/EC: RoHS compliance available on selected lines