Relay Sockets: RS Series

RS8
8-pin octal-type socket assemblies

Rating: 10 amps, 250 volts.
Track: TR2 48”length holds up to 24 sockets.
Terminals: RS8 - No. 6-32 screws, 7/16” C. to C. spacing. RS8SC - No. 6-32 screws with captivated wire clamp. 7/16” C. to C. spacing(no lugs required).
Wire: RS8 - up to No. 12AWG (lugs are recommended on wire larger than No.16AWG)
RS8SC - up to two No. 12AWG
Sockets: 8-pin octal receptacle to accept standard 2PDT relays and timers. Recessed slotted center post chamber allows relays to be rocked out without danger of damaging relay center posts. PC board has center post clearance hole to allow relays with screws in center post. Phosphor bronze contacts for better pin contact and retention.

RS11
11-pin octal-type socket assemblies

Rating: 10 amps, 250 volts.
Track: TR2 48”length holds up to 16 sockets.
Terminals: RS11 - No. 6-32 screws, 7/16” C. to C. spacing.
RS11SC - captivated wire clamp, 7/16: C. to C.
Wire: RS11 - up to No. 12AWG.(lugs are recommended on wire larger than No.16AWG). RS11SC - up to two No. 12AWG.
Sockets: 11-pin octal receptacle to accept 3PDT relays.
Refer to RSB socket for features

RS2, RS4 & RS6
10-, 16-, and 22-pin square-base miniature relay-type socket assemblies

Rating: 5 amps, 125 volts.(UL rated 3 amps, 125 volts)
Track: TR1 48” length holds up to 24 RS2 sockets, 21 RS4 sockets and 16 RS6 sockets.
Terminals: No. 2-56 screws with clamp - 1/4” C. to C. spacing.
Wire: Up to No.16AWG wire.
Sockets: RS2 - 10-pin receptacle to accept miniature 2PDT relays with latching coils.
RS4 - 16-pin receptacle to accept miniature 4PDT relays with latching coils.
RS6 - 22-pin receptacle to accept miniature 6PDT relays with latching coils.

RS12 & RS16
8-, and 11-pin square-base relay-type socket assemblies

Rating: 10 amps, 250 volts.
Track: TR3
48”length holds up to 16 RS12 or RS12SC sockets.
48”Length holds up to 22 RS16 or RS16SC sockets.
Terminals: RS12 and RS16 - No. 6-32 screws, 7/16” C. to C. spacing.
RS12SC and RS16SC - captivated wire clamp. 7/16” C. to C. spacing.
Wire: RS12 and RS16 - up to No. 12AWG. (lugs are recommended on wire larger than No. 16AWG).
RS12SC and RS16SC - up to two No. 12AWG.
Sockets: RS12 and RS12SC - 11-pin receptacle to accept 3PDT relays.
RS16 and RS 16SC - 8-pin receptacle to accept 2PDT relays.
NOTE: RS12 and RS12SC - CSA rating is 10 amps, 125 volts

RS14 & RS15
14-, and 15-pin square-base relay-type socket assemblies