Tempest Line Filters
Power Line Filters for Tempest Applications
- High-Power Performance in a Compact Package
- Designed to Meet Demanding Tempest Requirements for RFI Suppression 20 KHz to 1 GHz (and beyond)
- Operating Temperature -55 degrees C to +85 degrees C
- Custom Steel Enclosures with Bulkhead Mounting to Suit Your Needs
- Available in 1, 3, 5, 10 AMPs and beyond
- Current Ratings for 240 VAC (60 Hz) Line-to-Line Voltages
- Higher Line-to-Line Voltage Available Upon Request
Tempest Line Filters “Light”
- Same form, fit and function as the standard Tempest Filter Line without the large line to ground capacitance
- Lower than 3.5 mA of AC leakage current as required by UL 1283 for filters used in class 1 grounded equipment @120 VAC
- Lower resistance for reduction of equipment (internal heating)
- Operating temperature -55 degrees C to +85 degrees C
Highpass, Lowpass & Bandpass Filters
- In surface mount configuration
- Audio, communication and telemetry applications
Cylindrical Filters
- Dependable ceramic dielectric feed through capacitors
- Outstanding interference suppression with several cut-off frequencies
- Cylindrical filters for Signal Line/Power Line/EMI/RFI Filtering
- Compact and durable package
- Available with a variety of I/O terminals and connectors
- Cylindricals are available in a variety of AC/DC voltages
- Operating temperatures -55 degrees C to +125 degrees C
Data Control Line Filter
- Available in a variety of line-to-line and line-to-ground impedances (i.e. 50 ohms)
- Approved for secure filter applications
Hermetically sealed, custom steel housing and glass-metal compression terminals - Operating temperatures -55 degrees C to +85 degrees C
- Dual style DC circuits from DC to 1 GHz (and beyond)
- Standard and custom designs available
RF Power Entry Filters
- Design for RF protection of electrical traffic signal controllers. NF-670 has been tested and certified as an approved component for protection of traffic light control systems, in major metropolitan areas
- Environmentally protected custom steel enclosures. Available w/optional surge protection
- Operating temperature -55 degrees C to +85 degrees C
- 125 volts, 60 Hz, A.C. 35, AMP. steady state
Fiber Optic Couplers
- Available in single and dual circuit configurations
- Low profile packaging with connectors
- Standard and custom designs available